| After-sales Service: | Free Replacement Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Crawler Excavator |
| Usage: | GM Excavator |
| Bucket: | Grab Shovel |
| Transmission: | Hydraulic Transmission |
| Customization: |
|---|
Suppliers with verified business licenses
Efficient and reliable:
Equipped with Japanese Yanmar engine, which complies with Euro V and EPA4 emission standards, ensuring the reliability of the machine under harsh working conditions;
Standard high-precision air filter and two-stage diesel filtration ensure reliable engine operation.
Sensitive and stable:
Equipped with hydraulic components specially supplied by Carter Heavy Industries, the action control is more sensitive, the system performance is more stable and the reliability is higher.
1,Convenient and flexible:
2,,The chassis is retractable and the foldable dozer blade allows flexible working width; the working device can be deflected and is suitable for various side and corner places; hydraulic pilot control makes operation more flexible; hydraulic quick-change pipelines facilitate the installation of various attachments .
3, The flip-up integral rear hood allows daily maintenance to be performed by opening the hood.
safe and comfort:
4,The whole machine complies with CE certification requirements. The driver's cab and driver's shed are designed to be anti-tip and anti-falling. It has obtained TOPS and FOPS certification requirements and is safer; the cab model is equipped with a heater to better improve the comfort of winter work. sex.
Small excavators are widely used in greenhouse orchards, mountain ditches, rural renovation, indoor and outdoor, construction projects, road finishing and other working conditions.
1. Preheating of the hydraulic device. When the temperature of the hydraulic oil is low, rapid operation will cause damage to the hydraulic device.
1.1. The small excavator engine runs at a medium speed, operates the bucket, and preheats;
1.2. Jack up the machine to rotate the crawler, and preheat the left and right travel motors respectively;
1.3. Then, raise the speed of the engine to the highest, and make the bucket and stick work continuously for 5 minutes;
At the same time, the safety of the surrounding environment should be fully paid attention to during the warm-up operation. When the temperature is low, the reaction of people will be relatively slow, so it is necessary to prevent people and objects around them during warm-up.
Second, the preheating of the small excavator engine, the first step in getting on the car, the engine should be started and run at low speed for 5 minutes. At the same time, the following inspections should be carried out during the warm-up process of the small excavator engine:
2.11. Whether the oil warning light is off;
2.2. Whether there is oil leakage or water leakage;
2.3. Whether the sound of the engine and the color of the exhaust are normal;
2.4. Whether the charging indicator light is off;
2.5. Whether each part of the machine is abnormal.
Specification of mino excavator /mini digger/digging machines /small excavator CT18
1 Engine have passed CE/EPA certificate.
2 Originally imported Yammar engine, low noise, low fuel consumption, big torque.
3 Power system and hydraulic system cooperate well to improve 10% dig power.
4 Optional extension track to improve stability.
5 Boom deflexion meet narrow work condition.
6Optional hydraulic quick hitch, hammer, breaker, ripper , drill, etc.
| Engine | Travel System | ||||||||||
| Model | Yanmar 3TNV76 | Travel motors | Eaton | ||||||||
| Type | Direct injection, water cooled, natural intake | Support roller quantities | 2×3 | ||||||||
| Carrier roller quantities | 2×1 | ||||||||||
| No. of cylinder | 3 | Travel shoes | No | ||||||||
| Bore and stroke | 70x74(mm) | Travel speed | 2.2/4.2(km/h) | ||||||||
| Displacement | 0.854L | Drawbar pulling force | 11.7kN | ||||||||
| Power output | 14.1kw/2400rpm | Gradeability | 58%(300) | ||||||||
| Max. torque | 50N.m/2000rpm | Track shoes thickness | 5mm | ||||||||
| Hydraulic System | Cab & Electrical System | ||||||||||
| Pump | CASAPPA | Cab | All-weather, sound-suppressed Cab and equipped with a heavy, insulated Floor Mat, Front Window can be opened and slided; adjustable Seat | ||||||||
| Type | Axial-piston pump+gear pump | ||||||||||
| Max. discharge flow | 54 (L/min) | ||||||||||
| Max. discharge pressure | |||||||||||
| Boom, arm and bucket | 21 MPa | Voltage | 12V | ||||||||
| Travel circuit | 12 MPa | Batteries | 1X12V | ||||||||
| Swing circuit | 9 MPa | Battery capacity | 60Ah | ||||||||
| Control circuit | 3.9 MPa | Boom, Arm & Bucket | |||||||||
| Pilot control pump | Gear type | Boom cylinder | Φ60xΦ35xS440-L770 | ||||||||
| Main control valves | Hydro Control | Arm cylinder | Φ60xΦ35xS330-L600 | ||||||||
| Oil cooler | Air cooled type | Bucket cylinder | Φ55xΦ30xS300-L560 | ||||||||
| Swing System | Refilling Capacity & lubrication | ||||||||||
| Swing motor | Eaton | Fuel tank | 32L | ||||||||
| Swing motor type | Axial-piston motor | Cooling system | 8L | ||||||||
| Brake | No | Engine oil | 4.4L | ||||||||
| Swing speed | 8.8 r/min | Hydraulic oil tank | 18L Tank Oil Level | ||||||||
| 21L Hydraulic System | |||||||||||
| Bucket | |||||||||||
| Type | Backhoe bucket | ||||||||||
| Bucket capacity | 0.04m3 (SAE) | ||||||||||
| Bucket Capacity scope | 0.028-0.095m3 | ||||||||||
| Number of bucket teeth | 4 | ||||||||||
| Bucket width | 450 mm | ||||||||||
| Working ranges | |||||||||||
| Boom length | 1830mm | ||||||||||
| A | Max. digging height | 3327mm | |||||||||
| B | Max. dumping height | 2361mm | |||||||||
| C | Max. digging depth | 2110mm | |||||||||
| D | Max. vertical digging depth | 1600mm | |||||||||
| E | Max. digging distance | 3947mm | |||||||||
| F | Max. digging radius at ground level | 3889mm | |||||||||
| Digging Force (ISO6015) | |||||||||||
| Arm length | 950mm | ||||||||||
| A | Bucket digging force | 14.8 KN | |||||||||
| B | Arm digging force | 10.2 KN | |||||||||
| Overall Dimensions | |||||||||||
| A | Overall length | 3867mm | G | Tail swing radius | 1072mm | ||||||
| B | Overall width | 1000mm | H | Track grounding length | 1210mm | ||||||
| C | Overall height(to top of boom) | 1185mm | I | Track length | 1588mm | ||||||
| D | Overall height(to top of cab) | 2313mm | J | Track gauge(extension 1090mm) | 760mm | ||||||
| E | Counter weight ground clearance | 484mm | K | Track Shoe width | 230mm | ||||||
| F | Min. Ground clearance | 175mm | L | Revolving frame width | 1000mm | ||||||
MINI EXCAVATOR Features:
SOLID Heavy Industries has recently developed a mini excavator known as the "Indoor Elf," designed to be compact, flexible, and easily mobile. This innovative machine saves time and effort and is suitable for indoor, orchard, agricultural, municipal, industrial, and various other applications.
Key Features:
1. Equipped with an engine that complies with Euro V emission standards, providing robust power, stable performance, and smooth, low-vibration operation.
2. Utilizes hydraulic components exclusively provided by Cater Heavy Industries for stable operation and high reliability.
3. User-friendly design for control and switch mechanisms, making operation easy and enhancing working comfort.
4. Maintenance is made convenient with a rear-hinged overall machine cover, facilitating servicing and inspections.
SOLID was founded in 2008 year. Since then, SOLID has stood at the forefront of the Chinese construction machinery industry and developed into one of the domestic industry's largest, most influential, and most competitive enterprise groups with the most complete product varieties and series.
SOLID is ranked 65th in the list of China's Top 500 Companies, 44th in the list of China's Top 100 Manufacturing Enterprises, and 2ND in the list of China's Top 100 Machinery Manufacturers. SOLID is dedicated to its core value of "Taking Great Responsibilities, Acting With Great Morals, and Making Great Achievements" and its corporate spirit of being "Rigorous, Practical, Progressive, and Creative" in order to keep moving towards its ultimate goal of becoming a leading world-class enterprise capable of creating real value.
SOLID mainly supply Hoisting machinery, MiningMachinery Machinery, , Excavators, Loaders, Road Machinery, Piling Machinery, Non-Excavation Machinery, Concrete Machinery, Special Vehicle, Aerial Working Equipment, Sanitation Machinery, Fire-fighting Machinery, Tunnel Machinery, Resource Exploration Machinery, Port Machinery and so on
SOLID products, including mechanical vibratory road rolls, mini excavators .mini digger ,and motor graders, have successfully participated in the construction of the largest railway project in the Philippines, thanks to their outstanding performance and comprehensive after-sales service. These three types of machines have contributed to the project's progress in an organized manner. During our on-site visits to customers, they expressed that SOLID products are reliable in quality, and the compact excavator equipped with a hydraulic breaker delivers excellent impact force. This effectively ensures the project's advancement and contributes to its completion within the expected timeframe, providing additional momentum to the development of local livelihood projects.
Suppliers with verified business licenses
){kind=link}
){kind=link}