| Customization: | Available |
|---|---|
| After-sales Service: | Engineer Service in Local |
| Warranty: | 2 Year Warranty |
Suppliers with verified business licenses
Over 40 years of building forklifts have culminated in the HNF Series from SOLID Group. This experience, combined with the latest in forklift technology, the result is a line of forklifts that are efficient, environmentally conscious, comfortable, reliable, and safe. The HNF series represents the true do it all forklift from SOLID Group.
SOLID mainly supply high capacity heavy forklift truck with 10ton forklift,12ton forklift ,15ton forklift ,20ton forklift ,25ton forklift ,30ton forklift ,35ton forklift ,40ton forklift and 50ton forklift
1, adopt Cummis, Weichai, Yuchai turbocharging engine, powerful, energy conservation, environmental protection, satisfies the requirement of high efficiency operation.
2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable.
3, adopt double turbine hydraulic torque converter, stepless speed change, single lever control for the speed changing, easier for operation.
4, Variable speed control valve matched with neutral starter, the machine start more secure.
5, front axle adopt heavy duty type driving axle, enlarge size of axle housing, hub and bearing, spiral bevel gear and wheel planetary wheel deceleration increasing twist, steel structure bridge shell support, increase the load capacity and service life.
6, No spokes plate type rim, increase the bearing capacity of hub.
7, rear axle by transverse hydraulic cylinder type steering, steering axle has compact structure, transmission angle is 70.5 °, help to reduce the resistance and reduce tire wear and improve the driving comfort.
8, using four heavy caliper disc brake, thicken brake disc, the rear air tank, 18 times braking pressure strength ratio, heat dissipation faster, reliable and safe operation
9, hydraulic load sensing steering system, rear steering axle with small turning radius, flexible and light steering
10, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance
11, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out
12, cooperate with hercynian institute of Chinese Academy of Sciences "overall structure optimization scheme", verifies the stiffness and strength calculation, fatigue life forecast on the forklift, comprehensive finite element mechanics analysis, structure design optimization, ensure the security of the products use
12.1, adopt long wheelbase, box double beam frame, can provide good rigidity and strength, to ensure the high reliability of forklift truck chassis
12.2, inner and outer mast adopt roller operate, the door frame with roller, movable block energy structure, long service life of the mast, high reliability
12.3, mast lifting height can be up to 3 meters, high mast, low mast, standard mast and a variety of accessories can be fitteed according to customers' requirements
12.4, adopted quick hitch shelf, change quickly. Hydraulic fork positioner, easy to adjust. Cascade high strength fork, more wear-resisting, can multiply ser
| Configuration | Model | CPCD200 | ||
| HNF-200 | ||||
| Performance | Rated load | kg | 20000 | |
| Load center | mm | 900 | ||
| Mast tilt angle (front/rear) | o | 6/12 | ||
| Overall dimensions | Length | mm | 8340 | |
| Width | mm | 3050 | ||
| Height | mm | 3860 | ||
| Mast lifting height | mm | 3500 | ||
| Fork size (L*W*H) | mm | 2000*260*100 | ||
| Min. turning radius | mm | 6250 | ||
| Max. travel speed (unload) | km/h | 28 | ||
| Lifting speed (with load) | mm/s | 260 | ||
| Gradeability (with load) | % | 20 | ||
| Weight | kg | 32000 | ||
| Tyre | Front | 4*14.00-24/24PR | ||
| Rear | 2*14.00-24/24PR | |||
| Wheel tread | Front | mm | 2200 | |
| Rear | mm | 2390 | ||
| Wheelbase | mm | 4000 | ||
| Min. ground clearance | mm | 250 | ||
| Engine | Model | WD10G220 | ||
| Rated power/rotate speed | Kw/r.pm | 162/2200 | ||
| Max. torque / rotate speed | N.m/r.pm | 850/1450 | ||
| Configuration | Model | CPCD150 | ||
| HNF-150 | ||||
| Performance | Rated load | kg | 15000 | |
| Load center | mm | 900 | ||
| Mast tilt angle (front/rear) | o | 6/12 | ||
| Overall dimensions | Length | mm | 7645 | |
| Width | mm | 2750 | ||
| Height | mm | 3625 | ||
| Mast lifting height | mm | 3500 | ||
| Fork size (L*W*H) | mm | 1800*180*90 | ||
| Min. turning radius | mm | 5800 | ||
| Max. travel speed (unload) | km/h | 30 | ||
| Lifting speed (with load) | mm/s | 300 | ||
| Gradeability (with load) | % | 20 | ||
| Weight | kg | 22000 | ||
| Tyre | Front | 4*12.00-24/18PR | ||
| Rear | 2*12.00-20/18PR | |||
| Wheel tread | Front | mm | 2060 | |
| Rear | mm | 2330 | ||
| Wheelbase | mm | 3800 | ||
| Min. ground clearance | mm | 265 | ||
| Engine | Model | YC6A175Z-T20 | ||
| Rated power/rotate speed | Kw/r.pm | 128/2200 | ||
| Max. torque / rotate speed | N.m/r.pm | 650/1500 | ||
| Configuration | Model | CPCD250 | ||
| HNF-250 | ||||
| Performance | Rated load | kg | 25000 | |
| Load center | mm | 1250 | ||
| Mast tilt angle (front/rear) | o | 6/12 | ||
| Overall dimensions | Length | mm | 8400 | |
| Width8400 | mm | 3050 | ||
| Height | mm | 4350 | ||
| Max. lifting height | mm | 4700 | ||
| Fork size (L*W*H) | mm | 2440*300*110 | ||
| Min. turning radius | mm | 6300 | ||
| Max. travel speed (unload) | km/h | 28 | ||
| Lifting speed (with load) | mm/s | 260 | ||
| Gradeability (with load) | % | 20 | ||
| Weight | kg | 35500 | ||
| Tyre | Front | 4*14.00-24/28PR | ||
| Rear | 2*14.00-24/28PR | |||
| Wheel tread | Front | mm | 2200 | |
| Rear | mm | 2390 | ||
| Wheelbase | mm | 4000 | ||
| Min. ground clearance | mm | 150 | ||
| Engine | Model | WD10G220E21 | ||
| Rated power/rotate speed | Kw/r.pm | 162/2200 | ||
| Max. torque / rotate speed | N.m/r.pm | 850/1450 | ||
1, with massive deepen heavy forklift tire, rear steering axle can swing around the center, have good traction performance and passing performance.
2, matched with adjustable direction, airline seats, joystick control distributing valve and working device, flexible and convenient manipulation
3, using domestic high quality electrical components, maintenance-free battery, the wire resistance of flame retardant materials, reliable and durable. Cabin matched wiht fan, radios, air conditioner, reversing display, can match with weighting machine according to customers' requirements.
4, the whole machine is beautiful and smooth. Luxury wide view cabin, along with the skylight, low noise, good sealing
5, domestication parts, standardization, cost-effective, parts commonality good easy procurement, daily maintenance is simple and quick.
6. widely used in airports, ports, docks, stations, warehouses and other big working intensity occasions for loading and unloading, stacking and short-distance transportation
SOLID was founded in 2008 year. Since then, SOLID has stood at the forefront of the Chinese construction machinery industry and developed into one of the domestic industry's largest, most influential, and most competitive enterprise groups with the most complete product varieties and series.
SOLID is ranked 65th in the list of China's Top 500 Companies, 44th in the list of China's Top 100 Manufacturing Enterprises, and 2ND in the list of China's Top 100 Machinery Manufacturers. SOLID is dedicated to its core value of "Taking Great Responsibilities, Acting With Great Morals, and Making Great Achievements" and its corporate spirit of being "Rigorous, Practical, Progressive, and Creative" in order to keep moving towards its ultimate goal of becoming a leading world-class enterprise capable of creating real value.
SOLID mainly supply SOLID forklift,Motor Grader ,Hoisting machinery, MiningMachinery Machinery, , Excavators, Loaders, Road Machinery, Piling Machinery, Non-Excavation Machinery, Concrete Machinery, Special Vehicle, Aerial Working Equipment, Sanitation Machinery, Fire-fighting Machinery, Tunnel Machinery, Resource Exploration Machinery, Port Machinery and so on
SOLID also is biggest agent of SINOTRUK SHACMAN ,mainly supply SINOTRUK and SHACMAN dump trucks ,Oil tank trucks ,Synchronous Chip Seal Truck,Cement spreader trucks ,Intelligent asphalt spreading trucks,tipper trucks ,road sweeper trucks ,water tank trucks ,oil tank trucks ,truck mounted crane ,mining trucks ,tractor head trucks ,port trucks ,side lifting crane with trailer chassis ,concrete pump trucks ,mixer trucks , terminal tractor trucks ,heavy trailer and other transportation trucks.
SOLID products, including hydraulic vibratory road roller, excavators and motor graders, have successfully participated in the construction of the largest railway project in the Philippines, thanks to their outstanding performance and comprehensive after-sales service. These three types of machines have contributed to the project's progress in an organized manner. During our on-site visits to customers, they expressed that SOLID products are reliable in quality, and the compact excavator equipped with a hydraulic breaker delivers excellent impact force. This effectively ensures the project's advancement and contributes to its completion within the expected timeframe, providing additional momentum to the development of local livelihood projects.
){kind=link}